Monday, November 23, 2015

Curbside Headboard to Repurposed Coat Rack


After completing my first headboard-to-coat rack project (see the other one here), the biggest question I heard was "Can you make one smaller?"  So I was on the hunt for a twin-sized headboard.  This one was curbside and perfect for repurposing.
The footboard is still waiting to be repurposed...
After sanding down to the beautiful blonde wood, I stumbled across an old horseshoe and knew it needed a home on this project.  I chose an antique white wood stain to keep the light color and allow the grain to be visible.  Then it was just the trim to be painted, all of it sealed, and added the hooks and horseshoe. 

The finished coat rack!

Look at the wood grain
 
Now it's ready to be hung by a horse-lover.   Maybe it will find a home in a barn, or a little girl's room, or an entryway...

Wednesday, November 18, 2015

Baseball-themed Dresser Makeover




This dresser, that was once used by another young boy, was needing an update.  The dresser was rock solid, but looked dated (since it was from the 1960s.).  That said, I live by "they don't make them like used to" so I prefer the older furniture over the new.  It was time for an update and a new home.  I can't take credit for this baseball idea since I pinned it on Pinterest over a year ago.  But I had to try it for myself.

The first thing to do was to make the drawer fronts smooth and remove the center hardware.  The decorative indented pattern on the drawers was filled in as well as the drawer pull holes (I would drill new holes later).

Next, I added the primer, paint, and began the baseball stitching.  To do this, I looked for the largest round object we had (a bungee chair in this case) and used it to trace the half-circle seams.  Using red paint, I began the stitches.

And finally, the finished product was coated in Minwax Polycrylic to protect it from wear and tear, and new drawer pulls were added.


Thursday, October 22, 2015

Sun Lover's End Table

Before and After
Awhile back I saw a tutorial on using contact paper to stain around a design.  I waited for the right furniture piece to be castoff to practice on.  When I stumbled upon this light colored end table, I knew it was my practice piece. 

I started by sanding down the top and choosing my design....a sun to hang on to summer a little longer.  After cutting the sun out of contact paper and laying it down, I first put down the MinWax  Pre-Stain Wood Conditioner.  Next, I used a cloth to apply the MinWax Wood Finish stain in "Red Oak".   Once dried, I removed the contact paper to find the sun design. 

The table received 3 coats of Polycrylic to the top and "Sarsapairlla" color to the bottom (also with Polycrylic).  The end result is a table to make summer last well into the winter!

 

Monday, October 19, 2015

Salvaged Desk: from Curbside to Charming

Before & After
There's nothing better than saving furniture from a landfill and turning it into something more charming than imagined.  That's what happened to this desk that was saved curbside.  Upon getting it out of the car, I quickly realized that it was discarded for it's black mold, not it's age.  The bottom 4 inches were caked in black mold and water damage.  After several unsuccessful attempts to remove it, my wonderful husband and I realized that the moldy molding could be removed!  Off it went...
Remove a few screws, give it a good hit with a sledgehammer and it was off!
As for the rest of the desk, it was in perfect condition, minus a few knicks and a "'67" carved on a drawer front.  With the bottom molding removed, there was now the issue of how to raise the desk back up.  Drawing on my endless supply of freebies (the desk was free too!), I found some wooden table legs I cut down to size. 

New legs and new trim were added along the bottom
 Due to the new wood added, and the older veneer, I chose to paint the bottom of the desk and only stain the top.  It's a new modern beauty!


Sunday, October 18, 2015

Easy Coffee Table Restoration (with Howard Restor-A-Finish)


Sometimes furniture is solid but on the less-than-pretty side.  I had been wanting to try Howard Restor-A-Finish but wanted an old "junker" to try it on.  So along came this FREE coffee table.  It was solid wood and ugly.  It was definitely in need of restoring!  This was the perfect guinea pig for my trial run with this product. 

To say I was pleasantly surprised is an understatement!  It was fast, easy, and came with phenominal results!!  Just look at the before and after!

BEFORE


AFTER
It covered over all the scratches, blemishes, and water spots from glasses long ago.  The only thing it didn't remove was the dark circle stain near the center.  Look at that grain restored!
There are a few "rules" for using the Restor-A-Finish.  First, there can't be any kind of a seal on the wood.  This table's finish was long gone....if it ever had one. So the wood was able to soak in the finish.  Also, a seal afterwards is not an option.  Third, to clean/dust it in the future, use Howards Beeswax.  It's my go-to cleaner for solid wood these days. 

For an instructional video, click below. 

Monday, August 24, 2015

19th Century Empire Dresser

Empire dresser, circa 1870s
When I found this gem for FREE, from a man who no longer had room for it, I knew I found a piece of history.  He was an older gentleman and said it had been his parents' dresser but didn't know the extended history.  After doing some research, and consulting on the piece, it was believed to have been from the 1870s.  Oh, how I love stumbling on a beauty!

Considering it's age, there really wasn't much to be fixed except two missing drawer knobs and a crack in the top that had already been stabilized.  Otherwise, it just needed a good oil rubdown and some touchups.

First, let me give you some reasons why it was worth saving.
1.  Gorgeous, handmade dovetail drawers!  These were done without a factory.  Makes me think of Pa Ingalls working away in his workshop for his Half-Pint Laura.  To think they held together all these years!

Hand-carved dovetail drawers


Each drawer was unique
2. Hand-planed wood too!  The inside of the dresser revealed hand-planed wood.  Again, serious Amerian craftsmanship.

With the drawers removed, you could see the raw hand-planed wood


Yes, the back piece had started slipping a little after 150 years of gravity!
3. Drawer knobs that were all one piece!  The knobs and their "screw" were all one piece of wood.  When I unscrewed the knobs, the threaded end was part of the knob.  Therefore, in order to fix the missing two knobs, I instead glued on two new knob "faces" to the existing remained of the broken knobs.  That way as much of the original knob was salvaged. 

Notice the two knobs on the left of the bottom two drawers were missing and then reconstructed.
4. The dresser had character in the form of a crack.  Some might see a crack as a flaw, but this crack showed it's almost 150 years of use.  It was a battle scar from the post-Civil War era to our modern day technology age.  It stood the test of time and took a crack along the way.  Prior to it coming to me, someone had carefully secured the inside to keep the crack from growing.  I added the glass to make sure it didn't bow over time or crack more. 

The top as it came to me

The "anchor" on two sides from the inside to hold the crack in place
The top after much cleaning and oil

The top with glass added.  It's ready for a new home!
 
Of course, I did a lot to bring the shine back and oiled up each drawer, inside and out with lemon oil.  The dresser was so dry.  It was ready for a new home.  The dresser sold and went to home that will treasure it for many more years to come.

Look at those gorgeous curves!

What a beauty!